Grooving machine for spun pile joint plate

Creasing machine is a specific equipment matching with end joint of pile for surface creasing. Its structure is simple with reasonable design, good quality of completed products, high degree of automation and simple maintenance.A Grooving Machine pipe is a tool used to create grooves or cuts on the surface of a pipe. These grooves or cuts are used to connect two pipes together using a coupling or fitting. The grooving machine pipe is designed to create a precise and consistent groove on the pipe surface, which ensures a tight and secure connection between the pipes. Automatic Falnge And End Plate Connect Machine sheet shearing machine

Technical parameters

No.	Name	Specification
1	Air source	MAX7.2kg/cm²
2	Input voltage	AC440v±5%,50Hz AC440v±5%,50Hz,three-phase four wire
3	Motor power	3KW
4	Creasing specification	1000
5	Rotary speed	25r/min
6	Working frequency	Approximate 30s for each
7	Machine weight	800Kg

Structure

No	Name	Description	Remark
1	Frame	Supports for other components
2	Apron board	Rotary feeding
3	Hanger rod	Press the pile hoop between the pressure rollers, and adjust it according to the length and diameter of the pile  hoop
4	Pressure roll	Crease, which shall be adjusted according to the length of pile hoop
5	Position	Positioning pile hoop, the position shall be adjusted according to the diameter of pile hoop
6	Lift	After the creasing completed, lift the pile hoop, and adjust the position according to the diameter of the pile hoop
7	Unloading	Push the pile hoop out between the pressure rollers
8	Track	Discharge rail